The Way to Install Bifold Door Hardware

Simple repairs may make it even more marketable if you’re planning to sell a home or in the event that you want to upgrade it. 1 update is that the installation of new hardware and doors. These substances are relatively cheap, and it’s worth your time to substitute rather than swapping out old parts for new, both hardware and doors. Bifold doors come in different widths and styles. Choose a pair which best fits application and your door frame opening.

Assess the width of the opening. Cut the track 1/8 inch shorter than the opening using a saw if necessary to match. The track centered on the jamb by means of a screw gun and screws provided in the kit.

Tap the pivots. All these are pieces that the doorway uses to slide along the track.

The jamb brackets to the ground, aligned with the track. These are two metal bits bent at 90 degrees.

Add a snugger guide to the monitor together with the pivot. These are. Depress the spring in the snugger. Position it below the track and launch it to lock it in the track.

Lift the door and enable the pivots to chair in the jamb bracket and the track. Twist the little foot at the base of the doorway to adjust the height of the doorway.

Drill a hole to get a knob on the manual doorway, centered from top to bottom, 2 inches. Penetrate through the doorway half way. Drill another 3/16-inch hole through the doorway from the back. Place the knob in the hole and screw it from the back with a screwdriver.

See related