What Size Belt Does My 2000 Series Cub Cadet Tractor Use?

When purchasing a replacement belt to your Cub Cadet 2000 series tractor, pick it based on your own deck size, version number and the dimensions of the belt . Appropriate size is vital for the belt to fit on the tractor. For example, the model number for a Cub Cadet 2000 series tractor with a 44- or 48-inch deck is OCC-954-3068.

Model Numbers

The size of straps required for Cub Cadet 2000 series mowers varies depending on deck dimensions. For 38- and 42-inch decks, belts are 110 1/2 inches long and 5/8 inch thick. The straps can be stretched, which explains why they fit on different deck sizes, but shouldn’t be used with a deck dimensions that they’re not designed for. The version number of your tractor is in the manual which came with your tractor, and on the device . Consider the underside of the chair to find it. It will help you identify the belt you need.

See related

How Many Inches to Space Grommets to Make a Curtain?

After you’ve sewn a fresh new pair of curtains for your room, then you don’t want to run the possibility of irrevocably ruining them by cutting holes for your grommets that are spaced incorrectly. While the right spacing is dependent on many factors, ultimately you have to be satisfied with the look and drape of your curtains when they are hung from the grommets.

Inches Apart

Space grommets that are up to 2 inches in diameter roughly 4.5 to 4.75 inches apart, measured from the center of a single grommet to the center of the next. Larger grommets will generally require larger spacing, but the specific quantity of distance between grommets of almost any dimension can fluctuate depending on the width of your curtains and your own preferences. Always use a amount of grommets for your own curtains, or they won’t hang evenly.

Spacing Formula and Layout

Divide the width of your curtain panel from the spacing you are using. Round this amount to the nearest number to find the necessary amount of grommets. Measure and mark the center of your curtain panel and then mark the spacing of your grommets before you start cutting the fabric to be sure you like the spacing and also to make certain there is sufficient space, at least two inches, from the border of your curtain to the center of the nearest grommet. Adjust as needed or as desirable.

See related

The way to Step Material for a Chair Slipcover

You can find a custom look, modernize your furniture, match your new decor, or simply save a vintage comfortable chair by making your own slipcover. Before you may begin sewing, though, you must work out just how much material you need. Finding the right measurements not only ensures that you don’t waste cash on excess material, but also prevents the more expensive mistake of not buying enough material and having to begin the job over from scratch.

Remove the seat cushion, if there’s one. If the seat doesn’t have another cushion, then skip to Step 4.

Measure the seat cushion. This includes three measurements; the width, the length, and the height of the pillow.

Add 3 inches to every seat cushion measurement, then insert all three together for the total size of the pillow.

Measure the seat base. This is either in which the pillow sits, or the seat of this seat, depending on whether it’s a cushion. Take two measurements: the width and the length.

Add 5 inches to every seat base measurement, and add both together.

Measure the height of this seat from the base of the seat to the ground and add three inches.

Remove the rear pillow, if there’s one. When there’s no back cushion, then skip to Step 10.

Measure the rear pillow. This includes three measurements: the width, the length, and the thickness of the pillow.

Insert three inches to every back cushion measurement and then add the three measurements together.

Measure the rear of the interior of the chair. This is just two measurements — from the very top to the seat base and from side to side.

Insert three inches to the measurements of the rear of the seat, and insert them both together.

Gauge the very back of the seat, from top to bottom and from side to side.

Insert three inches to each measurement from the rear of the seat, then insert the two together.

Gauge the arms. The initial measurement is from the rear of the seat, down over the edge of the arm and on to the ground. The second measurement begins at the base of the seat, and extends up and over the arm to the ground.

Insert both arm dimension together and then insert eight inches. Multiply this total by 2.

Add together the totals from steps 3, 5, 5, 6, 9, 11, 13 and 15.

Divide the total by 36. This total is the number of yards needed to cover the seat.

See related

Architect's Toolbox: Vestibules Remake an Entrance

In days gone by, when houses were difficult to warm, an air rifle was made between the outside and the inside of the home. This air rifle, or vestibule, served to control heat loss through the front door and had the added advantage of providing more control over who can enter your home. Typically small and functional, a vestibule occasionally included a coat closet, a location for umbrellas and also a place to gather the email.

Nevertheless vestibules also served more than those simply utilitarian needs. They allowed us to shift involving the great, vast and scaleless outdoors to the secure, comfortable and intimate scale of the interior. These chambers eased the transition between the general public and private domains of our lives.

In the 1950s and 1960s, as heating systems enhanced, we ceased building vestibules as these rooms were no longer worth the cost. However, in giving up about the vestibule we gave up on the idea of making a distinctive and gradual transition from outside to inside. Now so many houses are made with no transition, resulting in what frequently is a jarringly uneasy encounter when you walk through the door.

So let’s bring back that transition so we can facilitate our way out of one realm to another.

LDa Interiors & Architecture

The traditional old-house vestibule at a new home: a door between outside and inside, and a door between the vestibule and the front hall. The space of the vestibule is compressed and tight, making the space of their home all the more volatile and impressive.

Diana Abrashkin AIA

Vestibules were frequently built outside the wall of the home and were also a device for creating a human scale as you approached the front door.

2D3D Design, INC

What’s your front door? This vestibule functions to transition out of the common areas of the building to the private attic space. Certainly, the more important front door is your interior door from the vestibule into the attic.

Colleen Brett

Are vestibules inside spaces, outside spaces or both at precisely the exact same time? Bringing some of the stuff and colours from the outside into the vestibule blurs the lines between inside and outside.

LDa Interiors & Architecture

Large doors open the vestibule into the stair hall when not shut. The scale of those double doors and opening provides a relationship between the bigger scale of the vestibule and bigger scale of the stair hall.

Brian Watford Interiors

Away to the side and forcing a set of turns to enter or leave the space, this entryway is not shut off with another door. Large windows bring sunlight. And the window chair makes the vestibule all the operational.

Schrader & Companies

A vestibule-like entrance can be produced at a home that’s tight on space. A couple specifying columns, maybe a built in seat and a reduced ceiling create the transition area that eases the movement from outside to inside.

Hufft Projects

Conventional approaches aren’t the only alternatives. Changes in flooring material and ceiling height, plus a screen wall, make that subtle but clearly defined transition space.

CARIB DANIEL MARTIN design and architecture llc

And just as conventional designs may have a vestibule-like transition area on the outside, so too can contemporary layouts.

More Architect’s Toolbox: Scale and Proportion

Decorating Around an Open Entryway

Keys into a Fashionable Entrance

See related