Tin siding and sheet is employed to protect the the outside of sheds, barns and a few homes. You will find times when the tin siding is employed to enhance inside a house. Making a straightedge and cutting through the steel is achievable when when working with strength sheet metal shears right for for the gauge of the siding. Other feasible cutting resources contain a leap shear, abrasive saw blades, tin snips as well as a saw. These four alternatives are less costly compared to the sheet-steel shears but are labor-intensive and leave a ragged edge.
Put on protective eye covering and gloves. Place the tin siding on a worksurface that is flat.
Place a mark on reverse sides of the tin siding in the predetermined area. Connect the marks.
Slide an 8 foot 2-by-4 below the siding. Position the 2 by-4 therefore it’s with around 2″ in the mark and mark. This causes the siding to sit with an angle.
Therefore the angled placement isn’t disturbed, hold down the siding.
Cut along the line with all the sheet metal shears.