The best way to Paint an Exterior Wood Staircase

Exterior wood stairs have to be drab or dull. As opposed to letting them detract from your look of your home, paint them a daring shade that coordinates with your exterior walls. Using floor and porch enamel, you’ve several colour choices. In the event that you prep the wood correctly, your colour lasts for years.

Clean the whole staircase, for example, base with warm water, of the treads. When there is mold on the stairs mix 1 quart of bleach. Use the the answer to to clean the stairs using a -bristle brush. Rinse with water and suction away all standing water using a wet-VAC. Leave the wood to dry.

Fill gaps, holes and cracks with exterior-grade-two- component wood filler. Pack it in the wood and erase the excess, leaving a few of the filler protruding over the surface of the wood. Leave the filler to treatment.

Chip a way flaking paint using a scraper. Be cautious not to gouge the wood while scraping. Together with the scraper, raise the edge on places where the paint is chipping exceptionally as much paint as possible, and peel-away. It’s essential before applying paint to avoid chipping and bubbling, paint is removed by you.

Sand any aged, weathered surfaces using an orbital sander before the the new, wholesome wood is displaying. Use 50-grit sandpaper. When they die, wood cells change gray as well as the paint WOn’t adhere properly to wood in this this problem.

Sand a way b-listers and drip marks from paint jobs. Sand chipped places, feathering the edges easy with all the wood. Run the sander on the the rest of the staircase to roughen up any surfaces that are shiny and eliminate grime.

Cover crops with plastic sheeting. Place plastic sheeting underneath the stairs as well as on walkways that are adjacent. Cover and mask off any near-by surfaces which will not be painted.

Knots with knotting compound to le Vel them-and prevent their look during the completed paint-job in the wood.

Mix the enamel and use the first coat using a roller. Spread the paint rolling over each location 2 to 3 instances. Use a paint brush on places that are slim, brushing 2 to 3 occasions each. The enamel is self-priming therefore there’s absolutely no need to get a unique primer whether you’re painting bare wood or previously painted wood. Leave this coat.

Use the 2nd coat utilizing the sam e methods. Leave the paint to dry according to manufacturers’ instructions.

See related